Schlage A10S - Standard Duty Commercial Passage Knob Set (A Series)
- Non-Keyed functions
- Passage Latch
- Both Knobs always unlocked
Handing: Keyed functions are reversible. Non-keyed functions are not handed.
Door thickness: 1 3⁄8" to 17⁄8" (35 mm to 48 mm) standard. 2” (51 mm) to 21⁄2" (64 mm) optional extended inside.
Backset: 23⁄8" (60 mm) standard. 23⁄4" (70 mm), 33⁄4" (95 mm) and 5" (127 mm) optional.
Front: Steel. 1 1⁄8" x 21⁄4" square corner, beveled, for 2 3⁄4" backset standard. Optional 1" square corner, 1" radius corner, and non-UL drive-in/round face. For availability with specific backsets
Lock chassis: Steel, zinc dichromate plated for corrosion resistance.
Latch bolt: Brass, chrome plated, 1⁄2" throw, deadlocking on keyed and exterior functions.
Exposed trim: Wrought brass, bronze or stainless steel. Levers are pressure cast zinc, plated to match finish symbols.
Strike: T-strike 1 1⁄8" x 23⁄4" (29 mm x 70 mm) x 11⁄8" (29 mm) lip to center with box standard. Optional strikes, lip lengths and ANSI strike box available
Cylinder and keys:
Commercial: 6-pin patented Everest 29 S123 keyway standard with two nickel silver keys per lock.
Residential: 6-pin C keyway, keyed 5-pin.
Keying options: Interchangeable core and Primus XP high security cylinders. Master keying, grand master keying, and construction keying.
Warranty: Three-year limited.
ANSI: Meets or exceeds A156.2 Series 4000, Grade 2 strength and operational requirements.
Federal: Meets FF-H-106C.
UL/cUL: All locks listed for A label single doors, 4' x 8'. Letter F and UL symbol on latch front indicate listing. UL437 Listed locking cylinder optional: specify Primus XP 20-500 Series cylinder.
ADA compliant: Schlage Lock Company offers a wide selection of locks designed to meet the Americans With Disabilities Act.
Finishes 612 and 643e is not available for GEO LEV TUL knobs
629 and 630 finishes only available in PLY knob
On keyed functions the LEV lever is available for inside trim only (A10S, A25D, A40S, only)